Project Overview
Location: Niger
Equipment: JBS40-10-82R Diesel Concrete Mixer Pump
Application: Residential & Commercial Building Construction
Max. Theoretical Concrete Output: 40 m³/h
Max. Concrete Pumping Pressure: 10 MPa
Customer Requirement
The customer was undertaking a building construction project in Niger, where concrete needed to be prepared and delivered at different locations on the job site. The construction site had limited space for setting up separate mixing and pumping equipment, while access to a stable power supply was also not always convenient.
The customer was therefore looking for a compact solution that could mix and pump concrete in one machine, reducing the need for additional equipment and simplifying concrete handling on site.
Another important consideration was the distance between the concrete preparation area and the pouring points. The customer needed sufficient pumping capacity to deliver concrete to different working positions without frequent equipment relocation. Since the project was located in a relatively demanding construction environment, reliable diesel power and straightforward operation were also important.
Our Solution
Based on the customer's working conditions, we recommended the JBS40-10-82R diesel concrete mixer pump. The machine combines concrete mixing and pumping functions, allowing the customer to prepare and continuously deliver concrete with one piece of equipment.
With a theoretical concrete output of up to 40 m³/h and a maximum pumping pressure of 10 MPa, the equipment can meet the concrete supply requirements of typical building construction projects. Its 0.56 m rated feed capacity and 0.45 m³ rated discharge capacity provide a practical balance between mixing efficiency and continuous pumping.
The machine is powered by an 82 kW Weichai diesel engine, making it suitable for construction sites where fixed electrical power may be unavailable or inconvenient. The S valve and Φ180 × 1000 mm concrete cylinders provide stable concrete conveying performance, while the 400 L hopper allows for convenient material feeding during operation.
With a theoretical conveying distance of up to 120 m vertically and 400 m horizontally, the mixer pump can serve pouring areas at different positions without requiring the equipment to be placed directly beside every working point.
Customer Feedback
"This machine is very practical for our construction site. Having mixing and pumping functions in one unit reduces the need to coordinate different pieces of equipment, while the diesel power suits our site conditions well. It is easy to operate and meets our daily concrete construction needs."
Project Highlights
● Integrated concrete mixing and pumping in one machine
● Reliable diesel power for sites with limited power supply
● Flexible concrete delivery to different working areas
● Reduced need for separate mixing and pumping equipment
◉ Inquiries & Messages
Related Posts
Online Message
Inquiries & Messages
Thank you very much for writing to us. Please leave your message and contact information, we will reply to you within 24 hours.